VW Floor Pans - Left & Right - 1973-77 Beetle - 1973-79 Super Beetle
{{ attribute.raw_prompt }}
You will receive an email when this product comes back in stock.
Notification Email
Cancel
Select Wishlist
New Wishlist Will Be CreatedCancel
- Description
-
Fits Years
- Videos
-
TechTips
- Shipping & Returns
- Q&A
- Shipping & Returns
Replacement Floor Pans for 1973-1977 VW Standard Beetle & 1973-1979 VW Super Beetle
- Left & Right replacement pan halves
- 0.035" (20 Gauge) thick sheet metal
- Includes jack mounts, center seat mounts, and rear rails
Brand New Replacement left and right side floor pans come complete with seat mounts and jack mounts. These are complete length & width floor pan halves and are designed to fit 1973 through 1977 VW Standard Beetles and 1973 through 1979 VW Super Beetles. Please note that purchasing front and rear patch sections will not make a complete floor pan.
The 1973-1979 VW floor pans feature dual seat rails and the center hump.
Product Fitment
- 1973-1977 VW Standard Beetle
- 1973-1979 VW Super Beetle
Installation Notes
The seat hump, rear crossmember and jack support may not be welded to the floor pan. We and many other floor pan installers recommend using the original crossmember, this actually saves time during the installation as the crossmember does not have to be removed from the replacement pan. We cover the process in our floor pan installtion video.
The center hump is included but may not be welded on at time of shipping as the manufacturer tries to consolidate size of package when shipping. This is an easy fix as installing floor pans requires welding on the tunnel side. Installation will require welding inner edge to chassis - just like original factory floor pans. Outer edge bolts to heat channel.
A replacement pan to body seal and floor pan hardware are recommended whenever installing new floor pans. We also recommend replacing the seat rail bushings when installing new floor pans.
Our Expert's Take:
If your pans are beyond repair, don't waste your time with a cheap fiberglass patch, rivited in piece of sheet metal or worse, a piece of wood. Also note that if the pan is rusted through below the battery or opposite side, replacement rear quarter pans are not the correct shape for 1973 and later Beetles. Installing new floor pans can be done with the body on the chassis but will require trimming and of course welding for proper installation.
Notes on Sheet Metal:
- Virtually all sheet metal parts are sent with a black, sprayed-on, rust inhibitor. This is NOT a paint or a primer. The black paint that comes on most sheet metal items must be removed before applying primer to the sheet metal.
- Expect scratches, minor dents, dings, and imperfections. These are considered normal. You will likely have to perform minor body work on any aftermarket sheet metal during the installation and restoration process. This is a universal issue across the entire classic car industry due to the nature of the product.
- Large dents would be considered excessive damage. All sheet metal is carefully inspected prior to shipping for any major dents. Any sheet metal that is received dented must be presented to the shipping carrier for a damage claim, regardless of the condition of the box.
- Test fit the all sheet metal before painting. Once body work or paint work has been done to any sheet metal item, it can't be returned! There are no exceptions!
Test fitting your seats before installation insures that you don't do twice the work! Seats, floor pans, and even the chassis could have been swapped so make sure your test fit your seat to the floor pan before installing it.
Shipping
We offer FREE SHIPPING on orders over $100*Orders under $100 cost a flat-rate, $11.95*
*Contiguous United States only. Excludes Hawaii & Alaska.
If you need express shipping, please call us for expedited shipping options. We will try to consolidate as much as possible to offer the lowest shipping rates.
Alaska, Hawaii, Puerto Rico, APO/FPO, & US TerritoriesFor orders to Hawaii, Alaska, APO/FPO, Puerto Rico and other US territories, we will provide you with your shipping options and the costs via phone. The shipping costs for these orders are billed at the time of shipping.
International ShippingWe do not ship internationally. We only ship to the USA and it's territories.
Returns
90 Day Return PolicyYou can return most unused, never installed, like-new items for 90 days from the date of receipt. Items must be in like-new condition.
The following items are final sale:
- Special order items
- Special order upholstery
- Electrical items
- Installed carburetors
- Once mounted, wheels cannot be returned