VW Floor Pan - Passenger Side (Right Half) - Hump Style - 1973-77 Beetle - 1973-79 Super Beetle
{{ attribute.raw_prompt }}
You will receive an email when this product comes back in stock.
Notification Email
Cancel
Select Wishlist
New Wishlist Will Be CreatedCancel
- Description
-
Fits Years
- Videos
-
TechTips
- Shipping & Returns
- Q&A
- Shipping & Returns
Brand New Replacement Passenger Side Floor Pan for 1973-1979 VW Beetle
- Complete with seat rails and jack mount
- Dual seat rails and center hump (specific to 1973-79 VW Beetles)
- Full length and width floor pan half
- Made from 0.035" (20 Gauge) sheet metal
This Brand New Replacement Passenger Side Floor Pan is a full-length and width half, designed to fit 1973-1979 VW Beetles. It features dual seat rails and a center hump, which may not be welded on at the time of shipping as the manufacturer consolidates the package size for international shipping. This is an easy fix during installation, which requires welding on the tunnel side.
Product Fitment
- 1973-1979 VW Standard Beetle
- 1973-1979 VW Super Beetle
Installation Notes
The seat hump, rear crossmember, and jack support may not be welded to the floor pan. To keep prices low, we ship these pans with loose pieces, which allows us to use a smaller box. Many installers recommend using the original crossmember, which saves time during installation as the crossmember does not have to be removed from the replacement pan. The process is covered in our floor pan installation video.
Installation will also require welding the inner edge to the chassis, just like the original factory floor pans, while the outer edge bolts to the heat channel.
A replacement pan to body seal and floor pan hardware are recommended whenever installing new floor pans. We also recommend replacing the seat rail bushings when installing new floor pans.
Notes on Sheet Metal:
- Virtually all sheet metal parts are sent with a black, sprayed-on, rust inhibitor. This is NOT a paint or a primer. The black paint that comes on most sheet metal items must be removed before applying primer to the sheet metal.
- Expect scratches, minor dents, dings, and imperfections. These are considered normal. You will likely have to perform minor body work on any aftermarket sheet metal during the installation and restoration process. This is a universal issue across the entire classic car industry due to the nature of the product.
- Large dents would be considered excessive damage. All sheet metal is carefully inspected prior to shipping for any major dents. Any sheet metal that is received dented must be presented to the shipping carrier for a damage claim, regardless of the condition of the box.
- Test fit the all sheet metal before painting. Once body work or paint work has been done to any sheet metal item, it can't be returned! There are no exceptions!
Test fitting your seats before installation insures that you don't do twice the work! Seats, floor pans, and even the chassis could have been swapped so make sure your test fit your seat to the floor pan before installing it.
Shipping
We offer FREE SHIPPING on orders over $100*Orders under $100 cost a flat-rate, $11.95*
*Contiguous United States only. Excludes Hawaii & Alaska.
If you need express shipping, please call us for expedited shipping options. We will try to consolidate as much as possible to offer the lowest shipping rates.
Alaska, Hawaii, Puerto Rico, APO/FPO, & US TerritoriesFor orders to Hawaii, Alaska, APO/FPO, Puerto Rico and other US territories, we will provide you with your shipping options and the costs via phone. The shipping costs for these orders are billed at the time of shipping.
International ShippingWe do not ship internationally. We only ship to the USA and it's territories.
Returns
90 Day Return PolicyYou can return most unused, never installed, like-new items for 90 days from the date of receipt. Items must be in like-new condition.
The following items are final sale:
- Special order items
- Special order upholstery
- Electrical items
- Installed carburetors
- Once mounted, wheels cannot be returned