1954-1965 VW Beetle & Karmann Disc Brake Kit - Wilwood Calipers - Front - Drop Spindles - 5x130
{{ attribute.raw_prompt }}
You will receive an email when this product comes back in stock.
Notification Email
Cancel
Select Wishlist
New Wishlist Will Be CreatedCancel
- Description
-
Fits Years
-
TechTips
- Shipping & Returns
- Q&A
- Shipping & Returns
EMPI's Wilwood Caliper equipped 2.5 inch drop spindle Front Double Drilled Disc Brake Kit is drilled for the 5x130 Porsche 5 lug pattern with 14x1.5mm threads and the 5x4.75 Chevrolet 5 lug with 12x1.5mm threads. The double drilled 5 lug disc brake conversion kit fits Link Pin front end Beetles and Karmann Ghias from 1954 through 1965. This disc brake kit will give your classic VW the stopping power of modern brake technology. The disc brake kit includes new 2.5" drop spindles, silver zinc plated rotors that are cross drilled and slotted for cooling, bearings, caps & seals, mounting hardware and instructions. These drop spindles are made for use with stock shocks. To provide the clamping power, EMPI has contracted with Wilwood Brakes to develop this stock VW style replacement brake caliper. The billet aluminum Wilwood Drop Spindle Disc Brake Conversion Kit includes Wilwood specific brake pads to complete the ultimate brake system upgrade. The calipers are available in a raw finish, or in a Black or Red painted finish for a custom look, just make the selection above. Pressing out the original link and king pins is necessary when installing new link pin spindles. Replacement king pins and link pins are available above.
This kit includes the following:
Disc Brake 2.5" Drop SpindlesSilver Zinc Plated Cross Drilled & Slotted Brake Rotors
5x130 Lug Pattern has 14x1.5 Threads
5x4.75 Lug Pattern has 12x1.5 Threads
Wilwood Disc Brake Calipers & Pads
Bearings, Seals & Caps
Mounting Hardware & Instructions
Low profile (shorter) tires must be used when installing drop spindles. We offer 145SR15 or 135SR15 tires that will fit with drop spindles. Your local tire shop can offer many other options that will work as well.
Removing the original link pins and king pins is necessary to install the new drop spindles. New king and link pins are available in the Additional Options tab above.
Installation Notes:
All brake parts must be thoroughly cleaned and disc brake grease must be used on all brake pad contact surfaces or brake squeak and vibration may occur.
15" or larger wheels must be used with the disc brake kit. 14" wheels can not be used.
The stock master cylinder can be used with front disc brakes. However, if you are converting to 4 wheel disc brakes, you must install a large bore master cylinder.
Drop Spindles can not be used on Super Beetles.
Our Expert's Take:
Stock drum brakes are adequate enough for a stock VW if all the components are in good working order. As soon as any performance modifications are made to your VW, the original brakes should be upgraded to suit. Virtually no modern cars use drum brakes, least of all on the front of the car where most of the braking power is. Updating the brakes on your VW should be considered mandatory for any car that is driven regularly. The added bonus of lowering the front suspension 2.5" while maintaining the factory ride and steering is a plus for those looking to drop the front end a bit over stock.
Drop Spindles require shorter (smaller diameter) tires to maintain standard drive-ability.
It might look like there is enough room to drop the front end of your VW 2.5" and clear the stock sized tire, and when it is parked, there absolutelyis. Take a drive in the car though, around a corner or over a speedbump, and you'll quickly discover that the stock size tire will rub. The heavier theload the more regularly the front tires will rub. Smaller tires are an absolute requirement with drop spindles. Stock tires will not clear, trust us.
Low profile (shorter) tires must be used when installing drop spindles. We offer 145SR15 or 135SR15 tires that will fit with drop spindles. Your local tire shop can offer many other options that will work as well.
Removing the original link pins and king pins is necessary to install the new drop spindles. New king and link pins are available in the Additional Options tab above.
Installation Notes:
All brake parts must be thoroughly cleaned and disc brake grease must be used on all brake pad contact surfaces or brake squeak and vibration may occur.
15" or larger wheels must be used with the disc brake kit. 14" wheels can not be used.
The stock master cylinder can be used with front disc brakes. However, if you are converting to 4 wheel disc brakes, you must install a large bore master cylinder.
Drop Spindles can not be used on Super Beetles.
Shipping
We offer FREE SHIPPING on orders over $100*Orders under $100 cost a flat-rate, $11.95*
*Contiguous United States only. Excludes Hawaii & Alaska.
If you need express shipping, please call us for expedited shipping options. We will try to consolidate as much as possible to offer the lowest shipping rates.
Alaska, Hawaii, Puerto Rico, APO/FPO, & US TerritoriesFor orders to Hawaii, Alaska, APO/FPO, Puerto Rico and other US territories, we will provide you with your shipping options and the costs via phone. The shipping costs for these orders are billed at the time of shipping.
International ShippingWe do not ship internationally. We only ship to the USA and it's territories.
Returns
90 Day Return PolicyYou can return most unused, never installed, like-new items for 90 days from the date of receipt. Items must be in like-new condition.
The following items are final sale:
- Special order items
- Special order upholstery
- Electrical items
- Installed carburetors
- Once mounted, wheels cannot be returned